Printed wooden trays and resin-finished decor bring artwork into everyday spaces, so caring for the surface matters as much as choosing the print. The right routine begins with identifying the actual material and finish on your piece.
This guide explains how to clean printed wooden trays using the gentle approach described in LacaOra's current care information. Individual product instructions take priority, particularly when a piece combines wood, MDF, glass or different surface finishes.
Read the listing before using a cleaning product
Similar-looking glossy surfaces can have different finishes. A tray described as lacquer-coated should not automatically receive a product intended for another type of coating. A glass panel also needs different handling from the wood around it.
If the finish is unclear, check the listing or ask for clarification. Do not experiment with solvents, strong household cleaners, polish or an abrasive paste in an attempt to restore shine.
Start with a soft, dry cloth
Remove loose dust gently
Use a clean, soft cloth with light pressure. Make sure there is no grit trapped in the fabric before moving it across the printed surface. Avoid rough cloths, scrubbers and sharp tools that could mark the finish.
Use moisture only as instructed
Some product care instructions permit a slightly damp cloth; others simply specify a smooth cloth. Follow the directions for the particular piece. Do not pour water onto the surface or soak a tray to loosen dried residue.
When the instructions allow a damp wipe, use only the moisture needed and dry the surface gently afterwards. If a mark will not lift with the permitted method, stop and ask for advice before trying something stronger.
Wipe spills promptly
A water-resistant surface does not mean the whole product is waterproof. Pay attention to rims, joints, bases and areas where moisture may collect. Remove a spill promptly and avoid leaving wet glasses or cloths on the surface for long periods.
Use appropriate coasters or mats under drinks. Keep food in suitable dishes, since a decorative coating is not confirmation that the surface is approved for direct food contact.
Protect the artwork between cleanings
Keep sharp utensils away from printed panels. Lift objects rather than dragging them across the surface, and avoid placing very hot items directly on it. Do not assume that a glossy resin or lacquer finish is heatproof or scratchproof.
LacaOra's general care guidance also advises avoiding harsh chemicals, soaking wooden parts and prolonged direct sunlight. Choose a dry storage position where the piece will not be pressed against abrasive objects.
Take extra care with mixed materials
The Floral Print Glass Top Side Stand includes a glass surface as described in its listing. Handle that component carefully and follow its own directions, rather than applying the same method to the glass, wood and printed areas without checking.
Similarly, the Neutral Abstract Tissue Box is described as MDF with a glossy epoxy resin finish. That is a different material combination from a wooden framed serving tray, even when both have a decorative glossy appearance.
When a mark or damage needs advice
If you notice lifting artwork, a crack, a loose component or an unfamiliar stain, avoid further treatment until the cause is clear. Photograph the issue and send the product link or order reference to LacaOra support. A clear description of what happened helps the team recommend the next step.
For ordinary upkeep, a light touch and a clean soft cloth are a better starting point than aggressive cleaning. Keep the instructions with your order so future care matches the piece you actually own.
Images are drawn from LacaOra product listings. Some room settings may be digitally enhanced or AI-assisted; props are not included unless the listing states otherwise. Check the product page for the selected design, measurements, materials and current options.